Aztech MR2800-W, User Manual

Page: 9 / 42

9
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Setting Up Your Modem
This chapter contains information on how to configure, install and
connect your modem card for Internet surfing.
3.1 Configuring Your Modem
Chapter 3
MR2800-W Modem Card needs to be configured as either Primary or Secondary device
before you can proceed to install the card on your PC.
To determine the choice of configuration, you need to refer to the BIOS Setup details on
your Motherboard User’s Manual . Check for the presence of AC’97 Audio** setting in
the BIOS Setup. (Not all motherboards will support AC’97 Audio).
1. Static electricity can cause permanent damage to your card. You have to
ground yourself during the installation by touching any non-painted sur-
face of the computer's chassis every minute or so.
2. It is important that you carry out the following steps to configure your
modem card BEFORE proceeding to install it.
3. Power off your computer and any connected devices before connecting
your modem card!
** your system may show AC’97 Audio controller
All manuals and user guides at all-guides.com