—– 6 —–
SAFETY
Installation and maintenance should only be carried out by qualified personnel.
All strobes generate high voltages which can remain for some time after the supply has been
removed.
NEVER
activate the strobe whilst the PCB is outside of its protective case.
For maintenance purposes, should you need to access the circuit by removing the PCB
protective cover, avoid touching that part of the circuit labelled
‘
WARNING HIGH VOLTAGE’
to eliminate the risk of electric shock.
SERVICING
If you need to access the External Sound Unit for maintenance purposes, ensure that the Control
Panel is in
DAY
or
UNSET
mode. Lift the front cover from the Sounder. You can now work on the
Unit without it sounding. ( Any internal sounder on your Alarm system will activate at this point
and will need to be deactivated from the control panel if necessary).
Most Control Panels have their own method of testing the strobe and siren which should be
utilised. Failing that, simply arm the system and cause an alarm activation to confirm correct
operation of the External Sound unit.
Temporarily disconnect the positive supply to the unit at the Control Panel to confirm that the
sounder self activates.
Replace the Sounder’s cover ensuring that the battery jumper is in the
ON
position and the timer
jumper set to
9
or
15
minutes as required.
WARRANTY
This product is warranted free from defects caused by design or manufacture for a period of two
years from date of manufacture.
Provided that the goods have not been modified, altered or misused in any way, the company
guarantees at its sole discretion to refund the price of, replace free of charge or to repair said
faulty goods.
The external Sound Unit does not constitute a complete alarm system, merely a component part
thereof, and Kinetic Electronics Limited cannot accept responsibility or liability for any damages
claim whatsoever based on a claim that the unit failed to function correctly.
