STEP 2:
Setting Up Your BroadBand Connection
Using the
Telephone Cable
(RJ11)
, connect the
Residential
Gateway’s
“DSL” Port to the
DSL
Microfilter’s
“DSL” port.
Insert the head of the
DSL
Microfilter
into your Telephone
the wall socket.
Note: You can connect your telephone
into the DSL Microfilter’s “Phone” port to
use your fixed Phoneline.
Connect
Power Adapter
to your
Residential Gateway
“POWER”
port and the mearest electrical
outlet. Turn “On” the power
at the electrical outlet and the
Residential Gateway
Please wait for approximately 5 minutes.
The “POWER” and the “BROADBAND”
LEDs should now be stable
GREEN
(
not
blinking
), except the “ETHERNET” LED,
it should be
GREEN
and blinking. If not,
please check connections 2.1 to 2.3. Do
NOT proceed to the next section until
you have done so.
LED Check:
2.1
2.2
2.3
