9
33. Create a second bumper group by sliding one rubber washer, one
foam bumper and another rubber washer onto the rod and pushing
these three pieces together.
34. Once these pieces are placed on the rod, you may slide the rod back
through the remaining hole in the side of the table soccer field box.
35. Slide the first bumper group far to the left, so that it is positioned on
the rod to the left of all of the precut holes.
36. Attach the blue figurines to the three
precut holes in the rod using three
small metal screws.
37. Slide both bumper groups so that
they are positioned on the rod
directly next to the outside figurines.
Bumper groups should be outside of
all of the figurines on both the right
and the left side. (see photo to the
right)
Bumper Group Placement
38. Place an end cap on the unfinished end of the rod.
39.
40. Locate the next rod, (Five figurine hole rod, handle on the right side.)
Slide this rod partially back out of the table soccer field box by
pulling the handle until the opposite end is resting in the center of the
field.
41. Create a bumper group by sliding one rubber washer, one foam
bumper and another rubber washer onto the rod. Push these three
pieces together to make the bumper group.
42. Next slide five red figurines onto this rod.
43. Create a second bumper group by sliding one rubber washer, one
foam bumper and another rubber washer onto the rod and pushing
these three pieces together.
44. Once these pieces are placed on the rod, you may slide the rod back
through the remaining hole in the side of the table soccer field box.
45. Slide the first bumper group far to the right, so that it is positioned on
