Azkoyen ES-525, Product Description

Page: 31 / 40

10015UK 01 -2004
Technical information:
ES-525 Validator
30
Made up of 8 dipswitches whose function is
established in the specifications of each
validator
.
8 7 6 5 4 3 2 1
Off
On
The most common functions are the following:
10.7.1. SW1, SW2, SW3
8 7 6 5 4 3 2 1
Off
On
They are used to inhibit coins the following way:
z
Coin Inhibition
. Inhibition of a coin or group of coins is assigned to each switch when it
is “ON”.
z
Coded Admission
. Internally in the software of the
validator
for determined coins, each
coin is individually assigned a value so when combining the positions of SW1, SW2 and
SW3 the admission of the coins can be decided. This is done in the following way:
SW1 SW2 SW3 ADMISSION
off off off Will not admit coin of the assigned value
off off on Admits coins that have been assigned the value 1
off on off Admits coins that have been assigned the value 2
.... ..... ..... ..................................................................
on on on Admits coins that have been assigned the value 7
You can also assign different values to the same coin.
z
Interchanging exit codes. Working in binary mode, you can change the exit code of
each coin if SW3
“ON”
.
10.7.2. SW4
z
Working in pulse mode . In pulse mode, if the switch is “on”, the validator works in
pulse mode to identify the coins programmed in the
validator
. That is, coins that are
multiples of others can use the same exit and it will give as many pulses as the
proportion the coin is of the base value.