10015UK 01 -2004
Technical information:
ES-525 Validator
15
When the coin leaves the validator, it breaks
the infrared beam generated by the exit
photocells; The system detects this and the
process is finished.
Coin exit photocells
2.2.
PROGRAMMING 2 TOKENS OR COINS
This function is for programming two
tokens or coins
without the need for any accessories.
Only the parameters of the measurements of the tokens or coins are programmed. The rest of
the parameters, (credit output line, inhibition, etc.), are established when defining the
validator
. To change any of this data the tele programmer TL21 is necessary.
To enter in “auto programming” mode, the programming sequence is the following:
1.
Set dipswitch 1 to indicate which token or coin is to be programmed.
Dipswitch 1 OFF: token or coin 1
8
7
6
5
4
3
2
1
Off
On
Dipswitch 1 ON: token or coin 2
8
7
6
5
4
3
2
1
Off
On
2.
Short pins 2 and 3 on JP1.
1 3
The
validator
indicates that it is in “auto
programming” mode by activating the
acceptance gate solenoid for a short time
(approx. 100 milliseconds).
Summary of Contents for ES-525
Page 20: ...10015UK 01 2004 Technical information ES 525 Validator 19 CE...
Page 33: ...10015UK 01 2004 Technical information ES 525 Validator 32 CPU Sel ES525 UK...
Page 34: ...10015UK 01 2004 Technical information ES 525 Validator 33...
Page 40: ...10015UK 01 2004 Technical information ES 525 Validator 39...
