Page 4
INSTALLING RAILING WITH GLASS INFILL
FOR CLASSIC COMPOSITE SERIES AND RESERVE RAIL
Radiance Top Rail
2.865"
2.945"
COMPONENT DIMENSIONS
1.8"
1.8"
5.38"
2.72"
Reserve Top Rail
3.5"
2.64"
Trademark
Top Rail
3.5"
2.63"
Premier Top Rail
2.5"
1.882"
2.5"
Universal Bottom
Rail
1.882"
3.5"
2.05"
Reserve Bottom
Rail
MEASURING YOUR RAILING AREA
• Measurements are from center to center of the posts.
Railing components are produced in 6' lenghts to allow for
finished end cuts and angles.
• Determine how many 6' TimberTech Rail Sections you
need and check to be sure you have all the components
(and quantities) listed in the chart shown.
1.2"
1.2"
.925"
.925"
Support Rail
Top Glass
Channel
Rubber Gasket
Bottom Glass
Channel
5.5"
5 1/2" x 5 1/2" Post Sleeve
5.5"
5"
5" x 5" Post Sleeve
5"
6.32"
6" x 6" Post Sleeve
6.32"
4" x 4" Post Sleeve
4.25"
4.25"
COMPONENTS NEEDED FOR INSTALLING
ONE TIMBERTECH RAIL SECTION
(TOP RAIL NOT INCLUDED IN CLASSIC COMPOSITE SERIES)
Components available
separately for mix-and-
match rail systems
Additional Components
Needed for Each System
(Sold Seperately)
(Top Rail Sold Seperately)
1 - Universal Bottom Rail (with Classic
Composite Series)
2 - Support Rails
Hardware Mounting Kit
Support Block Mounting Templates
1 - Foot Block
Timber
Tech C
ustom R
ail P
ack
1 - Top Rail
2 - Post Caps
2 - Post Sleeves
2 - Post Skirts
1/4" Tempered Glass must be sourced locally
(See attached reference sheet).
4 - Mounting Brackets
2 - Support Blocks
16 - #8 x 3/4" Screws
6 - #8 x 1 5/8" Screws
6 - #8 x 2 5/8" Screws (Stairs Only)
6 - #8 x 3" Screws
12 - #8 x 3" Semi-threaded Screws
T20 Driver Bit
1 - Top Glass Channel
1 - Bottom Glass Channel
2 - Rubber Gaskets
6 - #8 x 2 1/4" Screws
6 - #8 x 3" Screws
3 - #8 x 1" Screws
Hardware included in
Hardware Kits:
Glass Hardware Pack
