AB-6385
2
Safety Instructions
Please read instructions carefully and use the product as specified in this manual. Be sure to keep this manual near by for ready
reference.
Restrictions
This product is targeted for general air conditioning. Do not use this product in a situation where human life might be
affected. Also, do not install this product in an atmosphere containing explosive gas or flammable gas.
If this product is used in a clean room or a place where particularly high reliability or control accuracy is required, please
contact our sales representative. Azbil Corporation will not bear any responsibility for the results produced by the opera-
tors.
Warnings and Cautions
WARNING
Alerts users that improper handling might cause death or serious injury.
CAUTION
Alerts users that improper handling might cause minor injury or material loss.
Signs
Alerts users possible hazardous conditions caused by erroneous operation or erroneous use. The symbol inside
indicates the specific type of danger. (For example, the sign on the left warns of the risk of electric shock.)
Notifies users that specific actions are prohibited to prevent possible danger. The symbol inside
graphically
indicates the prohibited action. (For example, the sign on the left notifies that disassembly is prohibited.)
Instructs users to carry out a specific obligatory action to prevent possible danger. The symbol inside
graphically indicates the actual action to be carried out. (For example, the sign on the left indicates general in-
structions.)
WARNING
Before wiring or maintenance, be sure to turn off the power to this product. Failure to do might cause electric
shock or device failure.
Be sure to ground this product with ground resistance of less than 100
Ω
. Improper grounding might cause
electric shock or malfunction.
After wiring or engineering work, be sure to reattach the terminal cover to the original position. Failure to do so
might cause electric shock
CAUTION
(1/2)
Install and use this product under the operating conditions requirement (temperature, humidity, power, vibration,
shock, mounting direction, atmospheric condition, etc.) as listed in the specifications. Failure to do so might
cause fire or device failure.
Keep the products in package for storage. Failure to do so might damage or stain the products.
Do not allow any shock on this product. Doing so might damage the product.
Installation and wiring must be performed by qualified personnel in accordance with all applicable safety
standards.
Do not install this product nearby a steam coil or a hot-water coil. High temperature radiation might cause
malfunction of its actuator.
Do not use the product in an atmosphere corrosive to the actuator, valve, and their components. Doing so might
damage the product.
