Azbil MagneW Plus+ MGG14C, User Manual

Page: 4 / 110

ii
Safety messages
Carefully read this section before installing or operating this device.
Cautions for installation
WARNING
Installation of the device should be done by the expert from the safety perspective.
In case of the installation in the hazardous area, follow the regulation/guidance of the
explosion-proof.
In case of the installation in the hazardous area, select the explosion-protected apparatus.
Do not use the non-explosion-protected apparatus in the hazardous area.
Install the device in the environment where the following is within in the specifications
listed in the specification sheet.
•
Ambient temperature, process fluid temperature
•
Process fluid pressure
•
Humidity
•
Vibration
•
Power supply voltage
Environment which exceeds the specifications may cause fire or device damage and it may
cause injury.
CAUTION
DO NOT use the installed device as foot hold. It may cause the damage of the device.
DO NOT hit the glass of the device by tools. It may cause the damage of the device.
Install the device in a location with an ambient temperature of -25 °C to 60°C (-13 °F to
140 °F) and an ambient humidity of 5 to 100% RH to prevent device malfunction or output
errors.
DO NOT install the device near high-current power lines, motors, or transformers to pre-
vent damage from electromagnetic induction, which can cause device malfunction or
output errors.
DO NOT use the device to ground a welder. It can damage the device.
Be sure to ground the welding power transformer when welding near the device to avoid
output errors.
DO NOT install the device in the severe vibration area or in corrosive environment. It may
damage the device, or cause the fume of the device.
DO NOT install the device on the bridge or deck of the ship.
DO NOT install the device on in the severe vibration area on the ship.
Be sure to use the metal conduit for the cables between the remote style transmitter and
flowtube.
Be sure to install the flowtube with a distance of 500mm minimum from the other flow-
tube. Magnetic field generated by a flowtube may affect the other flowtube and it may
cause the output errors.
DO NOT install the device in a location subject to direct sunlight, wind, rain, severe vibra-
tion, or in a highly corrosive atmosphere. The transmitter and flowtube can be damaged.