Azbil JTD720A, User Manual, Page: 35 / 76

Azbil Corporation Starting and Stopping this Device
Model JTD720A - Smart Multivariable Transmitter 3-1
Chapter 3 : Starting and Stopping this
Device
Caution
If the transmitter uses SFN communication while the process is in the
automatic control state, the output may fluctuate, and the device may
enter a dangerous operating state. Before performing this operation, be
sure to switch the control loop of the process to manual control.
In this chapter, the following items will be described.
• Connecting a Communicator to this Device
•
Verifying Settings such as the Required Tag Number, the Output Format of
this Device, etc., during Receiving Inspection
• Preparations before Measurement
• Starting and Stopping Measurement
•
Items Necessary when Stopping this Device for Maintenance and
Replacement
For information regarding communicator usage, see the operation manual for the
relevant device.
Field Communication Software Model: CFS100 (Common Edition) User’s Manual :
CM2-CFS100-2001
Field Communication Software Model: CFS100 Instruction Manual (Smart
Transmitter Model JTD720A Edition : CM2-CFS100-2007
Advanced Transmitter(HART Version 5)
Before connecting to this device, be sure to read the operation manual carefully.