manualshive.com logo in svg

Azbil JTD720A, User Manual, Page: 3 / 76

Share
Download
Azbil JTD720A User Manual Download Page 3

Model JTD720A - Smart Multivariable Transmitter i

Safety

Safety instructions

Preface

Correct installation and periodic maintenance are essential to the safe use of your 

differential pressure transmitters.

Read the safety instructions provided in this manual carefully and understand them 

fully before starting installation, operation, and maintenance work.

Inspection

On delivery, make sure that the specifications are correct and check for any damage 

that may have occurred during transportation. This equipment was tested under a 

strict quality control program before shipment. If you find any problem in the quality 

specifications, please contact an Azbil Corporation representative immediately, 

providing the model name and serial number.
The name plate is mounted on the top of the enclosure.

Precautions

The following symbols are used in this manual to ensure user safety.

 WARNING

Denotes a potentially hazardous situation which, if not avoided, could result in 

death or serious injury.

 CAUTION

Denotes a potentially hazardous situation which, if not avoided, could result in 

operator minor injury or damage to device.

Summary of Contents for JTD720A













































































Reviews:

No comments