5
AB-7489-U
Valve and actuator (as a single unit) specifications
Item
Specification
Environmental conditions
Rated operating condition
Limit operating condition
Transport/storage
conditions (packaged*
2
)
Ambient temperature*
1
-4 to 122 °F (-20 to 50 °C)
(Fluid temperature 32 to 302 °F
(0 to 150 °C))
-4 to 140 °F
(-20 to 60 °C)
-4 to 158 °F
(-20 to 70 °C)
-4 to 104 °F (-20 to 40°C)
(Fluid temperature 302 to 347 °F
(150 to 175 °C))
Ambient humidity
5 % RH to 95 % RH
Vibration
16.1 fps
2
(4.9 m/s
2
)
(10 Hz to 150 Hz)
32.2 fps
2
(9.8 m/s
2
)
(10 Hz to 150 Hz)
64.3 fps
2
(19.6 m/s
2
)
(10 Hz to 150 Hz)
Notes:
*
1 Do not allow the fluid to freeze.
*
2 Actuator shall be packed during transport and storage.
Installation locations
Indoor (salt air, corrosive gas, flammable gas,
and organic solvent must be avoided.)
Outdoor (Use the outdoor cover etc. to be ordered separately. Direct sunlight, salt air,
corrosive gas, flammable gas, and organic solvent must be avoided.)
Installation orientation
Installable in any position ranging from upright to sideways (90° tilted.)
* Always install in upright position outdoors.
Position for shipment
100 % (fully open) preset at factory.
Options
For options, separate order is required.
Item
Specification
Seal connector
(Part No. 83104346-003)
Applicable wire size: 0.28" Dia. to 0.35" Dia.( 7mm Dia. to 9mm Dia.)
(Seal connector is necessary for NEMA 4X and IEC IP54 protection.)
Auxiliary switches
(Part No. 83174063-101)
Number of auxiliary switches: 2 (SW A and SW B)
Maximum applied voltage/current: 30 V DC / 100 mA DC
Actuating position
SW A: Adjustable between 0 % (fully closed) to 100 % (fully open)
SW B: Adjustable between 0 % (fully closed) to 100 % (fully open)
Ambient temperature °F
122
104
32
212
302
347
-4
Fluid temperature °F
