4
Administrator Guide – AzaCall200 VOIP Multi-Protocol Gateway
¾
If the user has an ADSL Modem…
z
Without an NAT device between ADSL mode and the gateway device
Directly plug one end of an 8-wire, RJ-45 Ethernet cable into the WAN port of
the gateway device and plug the other end into the Ethernet port of the Internet
service device, such as an ADSL modem. Then connect the ADSL modem to the
modem port of the splitter using a 2~4 wire, RJ-11 telephone cable.
z
With an NAT device between ADSL modem and gateway device
In contrast to the without-NAT scenario above, please first connect the gateway
device to the NAT device using an RJ-45 cable, then connect the NAT device to
the ADSL modem with an RJ-45 cable. The connection between ADSL modem
and the splitter remains the same as before.
Figure 2
Connectivity diagram for ADSL modem with NAT device
Note
For LINE port connection, please connect to phone port of splitter using
RJ 11 cable, and then connect splitter to phone socket on wall via RJ 11
cable, too.
