1. Check and ensure a AA battery (included) is inside
the ignition chamber and has power. Ensure the anode(+)
faces outside.
2. Ensure the control knob is OFF,slowly open the gas
cylinder valve.
3. Press and turn the
control knob to PILOT
position and hold in for
1 full minutes.
4.Push the igniter to
generate spark while
keeping control knob
in depressed position.
5. Check for pilot
D
C
6
B-4PCS
STEP 9:
Open the mesh guard carton, take out
mesh guard(Part BB). Hang the screens on the
four sides of aluminium tubes(Part U) and connect
top parts and bottom parts with small steel connector
tubes(Part E) from glass tube box.
Installation process
is complete.
Please remove protective
membrane off stainless
steel before you use.
OPERATION
10
11
