DOs
DONTs
Ensure the antenna connector
is secured tightly to the panel connector.
Mount antenna under the open sky or at
least 50cm (20in.) beneath any object.
Mount antenna at least 5 to 10cm (2 to 4in.)
away from wall.
Mount antenna at least 5cm (2in.) away
from the device.
Finalize the antenna setup to the exact
physical conditions. For example, close the
lid, close the door, etc.
Make sure you have a signal and a
successful data transmission by using the
mobile app.
Do not wrap cables, zip ties, or other
items around the antenna.
Do not attach the antenna to the
Wavelet.
IMPORTANT NOTE:
There are a few-
minutes of delay between a successful
transmission and the use of either of
these methods for initiating data
transmission. Repeating the use of either
method will not expedite data
transmission.
WARNING
: If installing in a highly corrosive
environment such as a sewer, apply technical
grease to the antenna and sensor field
attachable connectors after securing them to
the panel connectors. Ayyeka recommends
using Dow Corning Molykote 55 O-Ring
Grease, though similar products can be
effective.
If needed during installation, use the
Transmit Now
command in the
mobile app or the magnetic device
activator key to initiate more rapid
transmissions.
ANTENNA MOUNTING
27
Summary of Contents for WA3888 Series
