The dipswitch value is shown for each dipswitch. By adding several values you are able to make
combinations to reach the desired DMX value between 1 and 512. For example, if you wish to set the device
to channel 17, you need to select dipswitch 1 + 5.
A status LED is provided, indicating that the machine receives DMX-signal from your controller.
Turning on the machine
Turn on the ON/OFF switch on the rear of the machine. When doing so, you will not have instant smoke as
the internal heating element needs to reach a certain temperature. The machine has a built-in indication
LED, which projects on the liquid tank. This way you can see the tank light up when the fog machine is ready
(indicated with a green LED).
Projecting fog
After +/- 50 seconds (depends on the output volume) the fog machine will stop its output to reheat the
internal heating element. A built-in thermostat keeps the heating element on a proper temperature. During
the reheating time, the fog machine can not be used to project any fog.
All information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0
Creation date + author initials: 11-02-2014 RV Revision date + author initials: 16-06-2014 RV
