Ayrton AYD-20, User Manual

Page: 8 / 19

7
Operation Method
Clean the filter
indicator light
Lock on
indicator
light
High, mid and low
fan indicator light
Living
space
mode
on
indicator
light
Sleeping
space
mode on
indicator
light
Bucket full
light indicates
bucket needs
to be emptied
or it is not in
the proper
place
Power on
indicator
light
Notes:

Water bucket must be correctly installed for the dehumidifier to operate.

Do not remove the bucket while unit is in operation.

If you want to use drain hose to drain water away, please install the hose according to
section "Drainage method".

Each time pressing the effective button on the control panel will give out a "beep" sound.

When power is connected, power indicator on the control panel will be on and dehumidifier
gives out a "beep" sound simultaneously.
Basic Functions of the Buttons

POWER Button
Press this button to turn on / off dehumidifier.

+/- Button
Under free drying mode press these buttons to adjust set humidity. Invalid under other
modes.

Pressing + button will increase humidity while pressing - button will decrease
humidity. The display range of humidity is 35%~80%. Each pressing will
increase/decrease humidity by 5%.

When setting Timer On or Timer Off, press these buttons to adjust time. For specific
details, please refer to Timer Button description below.

When unit is in operation, h and - button simultaneously for 3s can
lock buttons. If this function is turned on, Button Locked Indicator will be on and display
window shows LC, which will blink for 3 times. Then ambient humidity is displayed
again. To turn off this function, hold + and - button simultaneously for 3s and the
indicator will be off.
Continuous
operation on
indicator
light
Basement
mode on
indicator
light
Timer
indicator
light