2
Assemble the ReceiverC and initialize
A.
The door of your
Receiver should already
be open; if it's not, please
open it:
B.
Plug an Ethernet cable into either port on
the Receiver - slide in until it clicks in place:
C.
Click the other end of the Ethernet cable
into the port on the power supply marked
"POE":
D.
Use another Ethernet cable to connect
the LAN port of the power supply to one of
the LAN ports on your router.
E.
Plug the power
supply into the wall:
This is how the
setup should look:
F.
The Power light should be
on; the signal lights will go
on and o , then the Wireless
light should also start
blinking:
DO NOT FORCE
CONNECTORS IN OR
OUT OF PORTS!
