![background image](http://html1.mh-extra.com/html/ayra/ita3d-600/ita3d-600_user-manual_3042298011.webp)
DMX operating mode
While in the DMX mode, it is possible to select the working mode of the laser. That way, you can either
choose to use your own programmed presets of your DMX controller, or to activate the music
activated/automatic working mode of the laser to have a fully-automatic lasershow. Depending on the starting
address you selected earlier, the laser responds to the following commands. In this example, we use DMX
starting address 1. When you use a different DMX-starting value, for example 29, the unit will respond from
channel 29, 30, 31.. and so on.
For more information about DMX, consult the manual of your DMX controller or software.
Channel
Function
Value
Description
1
Mode
0-63
Sound-active mode (disabling channel 2)
64-127
Automatic mode (disabling channel 2)
128-191
Manual mode, auto run function
192-255
Manual mode, sound-active mode
2
Effect mode
0-49
Multi-effect
50-99
Normal animation effect
100-149
Multi-pattern effect
150-199
3D dot effect
200-255
3D plane effect
3
Color
0-255
Closed – White – Red – Yellow – Green – Blue – Purple – Fixed
color – Random single color – Random 7 colors – Moving 7
colors – fixed color
4
Pattern
selection
0-255
128 built-in patterns
5
Movement Y
0-127
Manual Y positioning
128-191
Automatic down movement
192-255
Automatic up movement
6
Movement X
0-127
Manual X positioning
128-191
Automatic right movement
192-255
Automatic left movement
7
Rolling X
0-127
Manual positioning
128-255
Auto rolling
8
Rolling Y
0-127
Manual positioning
128-255
Auto rolling
9
Rotation
0-127
Manual positioning
128-191
Automatic clockwise rotation
192-255
Automatic counter-clockwise rotation
10
Zoom (+/-)
0-85
Auto zoom (+)
86-170
Auto zoom (-)
171-255
Manual zoom (+/-)
11
Pattern size
0-255
0 is moderate, 1-255 is small-large
12
Display dot
0-255
0 is display dot, 255 is optimal brightness
13
Drawing
0-127
Auto drawing mode 1
128-255
Auto drawing mode 2
NOTE:
While using ILDA, it is still possible to use DMX-channel 2 to control the effect wheel. It is also
possible to use the dipswitches on the rear of the unit.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0
Creation date + author initials: 05-12-2013 RV Revision date + author initials: 18-02-2014 RV