background image

or objects.
- Disconnect this device from a power source if it is not being used for a long period of time; if maintenance is
necessary, or if it needs to be cleaned.
– Do not pull or tug on the cable to remove a connector as this may cause damage.
- Do not use any cables other than the ones described in this manual. Do not use defective cables. Please 
contact your retailer if the included or necessary cables do not function properly with this device.
- Only use this device with a stable AC power supply.
- Only use this device with power from a grounded power source. 
- In the event that the device is exposed to extreme temperature changes (e.g. transported from a cold 
outdoor environment into a warm indoor environment), it should not be turned on until it has reached room 
temperature. This is necessary to prevent moisture (condensation) from forming inside the device, which 
could lead to electric shocks.

Guidelines and operation of this device:

- This device is intended for use by professionals on stage, in theatres, in clubs and in similar entertainment 
locations. 
- This device is not suitable for use by children and should always be operated by an adult.
- This device is designed to create light effects for entertainment purposes. It is not suitable for household 
illumination.
- This device may only be used in a suitable environment where no damage to the device can occur. Do not 
use the device in moist or dusty environments such as:

- indoor swimming pools where chlorine is used
- beaches or any location where sand and/or salt is present
- outdoors
- indoors in spaces where intense heat sources are present, or where it can reach temperature levels

that would be considered uncomfortable for a person
- Avoid impact and collisions during use and transport. Do not move or transport the device while it is in use. 
Avoid using excessive force when installing and operating the device. 
- Any user must become familiar with the functions of this device before using it. 
- Should the device not be used in the manner described in this user manual, damages or even injuries could
occur. Ayra cannot be held responsible for any injuries or damages that occur as a result of improper use of 
this product.

Storage and transport:

- This product was designed for mobile use. Please only transport the device in the original packaging, or in 
a flight case with a suitable foam inlay. 
- This device was not designed for permanent (24/7) use. The expected lifespan of the device will not be 
affected by occasionally turning the device off. Disconnect the device or turn off the power when it is not 
actively in use. 
- If the device is not in use for a long period of time, it should be disconnected and stored in a dust-free 
environment. 
- Do not expose the device to extreme temperature differences.

Housing:

- Inspect the device's housing frequently and always just before use. Avoid operating the device if there are 
any large dents or cracks, or if screws are missing. Do not use the device if the housing is not in good 
condition. 
Contact your dealer or a qualified technician if you are unsure about the state of the device.
- Check the device and the screws for corrosion. Corrosion must not be present on this device. Contact your 
dealer or a qualified technician if you find any corrosion on the screws. 
Every power and signal connector should be securely attached. Do not use the device if the connectors are 
not secure.
- Avoid dust and dirt build-up. Clean the device once a month by disconnecting it from the power supply and 
wiping it down with a dry or slightly moist cloth. If the device is used frequently, the cleaning intervals should 
increase.

The information shown in this user manual could be subject to change without further notice.

Version: 1.1

Date of creation and initials of author: 07-10-2019 RV

Date of revision and initials of author: -

Summary of Contents for ERO 150BSW




















Reviews: