9
the focus clockwise or counter-clockwise and check results while positioning the beam on a ceiling or
wall.
Warning:
To prevent damage to the stepping motors, only focus the lens manually when the mirror is
in a static position. With DMX, the best way is to project a gobo with white color on a wall or ceiling. Do
not touch the mirror.
Cleaning:
Clean the housing of the fixture frequently with a damp cloth, to remove dust and/or dirt.
WARNING:
Always disconnect the fixture from your wall outlet or other power supply and let the fixture dry before
reconnecting it. This prevents possible electrical shocks
The mirror and lens can be cleaned with a non-aggressive glass cleaning solution, but is not
recommended. Ayra recommends to clean the mirror and lens with a fine brush, while removing dust
and/or dirt with a vacuum cleaner.
Do not touch the mirror and lens with your fingers, as this may cause fingerprints which are harder to
remove.
Checkup
To prevent dangerous situations, make sure your fixture is in optimal condition before using it. Check
your fixture frequently by using the following checklist:
- All screws must be mounted tightly.
- Check all screws and metal parts for corrosion. No visible corrosion may be present.
- The exterior of your fixture must be in optimal condition. Check your fixture for dents, cracks or
missing parts.
- Your installation spot must be in optimal condition. Check your installation spot for corrosion, cracks,
dents and strength.
- Electrical components (connectors and cables) must be in optimal condition. Any form of damage
(cuts, exposed wire cores or any other visual deformities should not be present.
If any visual or mechanical damage is detected, contact your local dealer or a specialized technician.
Do not use a damaged or failing fixture.
Connectors and wiring schematics:
DMX-connections:
Electrical wiring:
