background image

Introduction

Thank you for purchasing the ERO Motion Heads 1W LED moving head. This versatile and compact device
is guaranteed to be  the life of  any great party.  This manual provides all the information you  need to know
about the product before you start using it.

We advise that you read this user manual in its entirety before unpacking the contents of the box, so that you
are familiar with all of the functionality that this product has to offer. Please be sure to check that all of the
parts and accessories listed below  under  'Box contents'  are included in the  package.  In the  event that the
ERO  Motion  Heads  1W  does  not  function  properly,  or  if  you  have  any  issues  while  operating  it,  please
remove the plug from the power socket and contact your retailer for assistance. 

Box contents:

- ERO Motion Heads 1W LED moving head with fixed power cable
- Suspension bracket with mounting materials

Please inspect the device and the included accessories.

Should you discover that either the device or one or more of the included parts have been damaged or 
rendered defective while in transit, please contact your retailer directly. 

Please note that the pictures in this user manual serve illustrative purposes only and may differ from the 
actual product.

The information in this user manual is subject to change at any time without notice.

Version: 1.0

Date of creation and author's initials: 07-10-2019 RV

Revision date and author's initials: -

Summary of Contents for 9000-0051-4485















Reviews: