completely disabled until the temperature drops to a maximum of less than 60 degrees. It is strongly
recommended not to use the device permanently or regularly in such extreme conditions.
At normal room temperatures, the device will never reach such extremes, even at full power.
Parts and repair
This product does not include spare parts and can not be repaired by the user. All inspections and overall
maintenance should be done by a specialist.
Cleaning and maintenance
Clean the exterior of this device monthly with a dry, or slightly damp microfibre cloth. Ensure that the device
is unplugged before cleaning it.
Check if all the screws are intact and secured and tighten or replace them where needed. Check all metal
parts of the device for any signs of corrosion. If corrosion is found, the device needs to be checked
thoroughly.
Power output
The Compar 50 / 60 is equipped with a Neutrik powerCON power input and a Neutrik powerCON output.
This makes it possible to feed multiple products through the device without the need for additional power
sockets.
The Compar 50 / 60's fuse is only intended to protect the device itself. The input and output of the power
supply are directly linked.
Because a standard 230V group has a maximum load of 16A and each Compar 50 /60 uses energy, the total
output should not exceed a maximum of 15A for the other devices. This also accounts for a small safety
margin.
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials:24-01-2017 RV
Revision date and author's initials: -
