Ayce 7613164540966, Operator'S Manual

Page: 41 / 48

GB
| 80 81
180814_ayce_NC200ES_IM 180814_ayce_NC200ES_IM
2. Product symbols
In this manual and/or on the machine the following symbols are used. These represent
important information about the product or instructions on its use.
200 W
rated output
182X92mm sanding
paper
230V~ 50Hz
230 V~50 Hz rated
voltage
With a dust extraction
bag and tube to
suction the dust
min
-1
6000-12000/min
variable speed
3M
3m cable with Swiss
plug
OPERATION
1. Before use
• Remove any packing material and loose parts from unit.
• Check the accessories before use. They should fit with the machine and your
purpose.
2. Functions
a. Selecting the right grade of sanding paper
Different grades of sanding paper can be purchased from the store where you
purchased the tool. Available grades are: Coarse, Medium and Fine.
Use a coarse grit to sand down rough finishes, medium grit to smooth the work and
fine grit to finish off.
It is best to make a trial run on a scrap piece of material to determine the optimum
grades of sanding paper for a particular job.
GRIT CHART
Grit Type Example of use
60 or less Very Coarse
Material removal, heavy paint removal, shaping
wood
80 – 100 Coarse
Paint removal, rough surface preparation (e.g. non-
planed wood)
120 – 150 Medium Surface preparation planed wood
180 – 220 Fine Sanding between coats
240 or more Very Fine Final finishing
b. Attaching a sanding paper (Fig.1)
WARNING
!
Always ensure that the machine is switched off and plug is removed
from the power point before making any adjustment.
Fig. 1
1. Select the required grade of sanding
paper.
2. Remove any dust or debris from the
hook and loop of the base.
3. To attach hook & loop type sanding
paper simply align the holes in the
sanding paper with the holes in the
sanding base and press firmly into
place.
200W 182X92mm
6000-12000