Ayce 7613164540966, Operator'S Manual

Page: 38 / 48

GB
| 74 75
180814_ayce_NC200ES_IM 180814_ayce_NC200ES_IM
INTENDED USE
The machine is intended for dry sanding with suitable grained abrasive papers. It is
suitable for surface grinding on wood, metal, body filler and filler surfaces, removal of
layers of old paint, intermediate grinding and rust removal
SPECIAL SAFETY INSTRUCTIONS
1.
Hold the power tool by insulated gripping surfaces, because the sanding
surface may contact its own cord. Cutting a "live" wire may make exposed
metal parts of the power tool "live" and could give the operator an electric
shock.
2. WARNING Contact with or inhalation of harmful / toxic dusts arising from
sanding painted surfaces, woods and metals can endanger the health of
operator and bystanders.
3. Take protective measures when dust can develop during working that is
harmful to one’s health, combustible or explosive. Example: Some dusts
are regarded as carcinogenic. Wear a dust mask and work with dust/chip
extraction when connectable.
4. Take special care to guard against these dusts, including the following:
• All persons entering the work area must wear an approved mask specially
designed for protection against harmful / toxic dusts, in addition to using the dust
extraction facility, and keeping work area well ventilated.
• Children and pregnant women must not enter the work area.
• Do not eat, drink or smoke in the work area.
5. Any pre1960 building may have paint containing lead on wood or metal
surfaces. If you suspect work-piece contains lead seek professional advice.
6. Some wood and wood type products especially MDF (Medium Density
Fibreboard) can produce dust that can be hazardous to your health. We
recommend the use of an approved face mask with replaceable filters when
using this machine in addition to using the dust extraction facility.
7. When using the sander with metal be aware that sparks may ignite the dust in
the dust extraction system or vacuum cleaner.
8. Hold the machine correctly using two hands and adopt a stable stance, make
sure that the mains cable is prevented from coming into contact with the
machine or getting caught up on other objects preventing completion of the
sanding pass.
9. This tool is intended to remove surface material using an abrasive medium.
10. Ensure that you have removed foreign objects such as nails and screws from
the work-piece before commencing sanding.
11. Do not use it for wet sanding, for dry sanding only.
12. Where possible, secure smaller work-pieces to prevent them from moving
under the sander.
13. Do not force the sander, let the tool do the work at a reasonable speed.
Overloading will occur if too much pressure is applied and the motor slows
resulting in inefficient sanding and possible damage to the sander motor.
14. Do not use the dust collection bag when sanding metal. The hot metal
particles could cause residual wood dust or the internal filter paper to catch
fire.
15. Do not continue to use worn, torn or heavily clogged sanding paper.
16. Do not touch the moving sanding paper.
17. The machine shall be used in a covered and dry area. The ambient
temperature shall be included between 15°C and 30°C. The humidity level
shall be less than 60%.
GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool.
Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
Save all the warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains operated (corded) power tool
or battery operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c)
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a)
Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c)
Do not expose power tools to rain or wet conditions.
Water entering a power
tool will increase the risk of electric shock.
WARNING
!