background image

7

REV. 6/26/2018 INSTAX-ADFD01

EXTRA FEATURES

ADJUSTING THE AX-ADFD01

RSE (rear seat entertainment), satellite radio, SYNC:

  If the vehicle is equipped with RSE, satellite radio, or SYNC, the AX-ADFD01 can retain these features.

  • Change the source of the radio to AUX-IN; SYNC audio will play if SYNC has been activated.

  • Either the vehicles display, or the optional AX-LCD (sold separately) will display the SYNC 

information.

  • Listed below are the functions of the AX-LCD:

  Arrow up

 - Channel up (only in SAT or USB mode)

  Arrow down

 - Channel down (only in SAT or USB mode)

  Enter

 - Selects current item on the screen

  Return/ESC

 - Exits to the previous screen

•  To access RSE or satellite radio, press and hold the MEDIA button on the steering wheel for 2 

seconds. This will switch to the next available source. Each time the MEDIA button is pressed 
for 2 seconds the source will change. The sequence of sources are SYNC/RSE/satellite radio. 
To temporarily disable SYNC/ RSE/SAT, press and hold the MEDIA button for 3 seconds. To 
turn it back on, press the MEDIA button for 2 seconds. There will be a visual confirmation of 
which source is selected from either the factory screen, or the AX-LCD. This screen will also 
provide satellite radio and SYNC information.

Audio level adjustment (Sony/THX only):

•  With the vehicle and radio turned on, turn the volume up 3/4 of the way.

•  With a small flat-blade screwdriver, adjust the potentiometer clockwise to raise the audio 

level; counterclockwise to lower the audio level.

•  Once at a desired level, audio level adjustment is complete.

Summary of Contents for AX-ADFD01

















Reviews: