Hardware Installation Guide
26
Disconnect all cables, then unscrew four
fasteners on controller and upward to
remove it.
Installing the controller into Yotta Sport
RAID:
Reverse the procedure of
“removing the
controller”
to install the controller into
Yotta Sport RAID.
Then according to “Appendix C.
Configuration table” on “Soft Operation
Manual” to reconfigure your RAID
YB-24S32F4 / YB-24S32F8 / YI-24S32S3 / YI-24S32PE:
Removing the controller from
YB-24 series
YB-24S32F4 / F8
1-1.) Disconnect the host
cables
1-2.) Turn anti-clock wise to
release the thumb screw.
1-3.) Use the eject kit to remove
YB-24S32S3
1-1.) Disconnect the host
cables
1-2.) Turn anti-clock wise to
release the thumb screw.
1-3.) Use the eject kit to remove
Summary of Contents for Yotta Sport
