Axus Yotta Sport, Hardware Installation Manual

Page: 24 / 58

Hardware Installation Guide
18
Place drive bays back into the system
1. Slide in drive bay, make sure the
handle is open fully.
2.
Close the handle to engage the drive
bay into the slot.
Note
The hard drives in a RAID array should match in size and speed. All drives in
any array should be identical models with the same firmware versions. RAID
arrays can use any size drive, however the smallest drive will determine the
size of the array.
Caution
Only use the screws offered with Yotta Sport RAID subsystem. Longer screws
might cause the drive damage.
Caution
All the drive bays ( with or without hard drive) must be placed in the Yotta
subsystem. Yotta’s cooling system is designed with full of drive bays. Missing
drive bays might cause the subsystem damage.