62
Service Manual
Plus
MICROSPEED
Option
7.2 Command with PWM + Direction (Option)
It is possible to run the Microspeed Plus using digital PWM
commands. (Frequency signal in PWM plus direction signal
DIR) (see figure ).
Such logic signals must be furnished to the Microspeed Plus
by a controller
which must be able to elaborate the motor's speed
ring
and possibly the positioning ring.
(The signals high logic level PWM and DIR must be between
+5Vdc and 24Vdc max.).The Microspeed comes predisposed
to function with supported logic signals, also highlighted in
the figure below.. The range of PWM frequency is 10 to 20Khz.
All manuals and user guides at all-guides.com