5
Service Manual
Plus
MICROSPEED
The Microspeed Plus must only be installed by trained, qualified
and authorized personnel.
Any intervention or modifications effected on Microspeed Plus,
and their components or accessories, constitutes loss of
guarantee.
Isolate the drive from the power supply net before removing it
(by removing fuses or turning off the principal power switch).
The drive is equipped with electronic protections that disactivate
it in case of abnormalities, therefore the motor becomes
uncontrolled; this could cause the stoppage or idle motor ( for a
period determined by the type of system used).
In some cases the drive could restart automatically when the
reason for blockage is corrected.
In this case, some systems could be damaged or destroyed
endangering the welfare of personnel.
In this case the user must remove the drives' and systmes' power
supply so that the motor cannot automatically restart or prevent
such an event in the controller's program.
The Microspeed Plus terminals must always be grounded as per
the instructions in this manual.
General Description
All manuals and user guides at all-guides.com