9
Peripheral Installation
4.
MSR Installation
4-1.
Turn the system to the rear side.
1.
Attach the MSR module into the
2.
right position of the system and
fasten the screws (x2).
Connect the MSR cable to the
3.
COM-RJ45 convertible connector
on the I/O panel.
Note:
Please set up the power setting
for COM3 or COM4 with 5V, see
Chapter 6 - Jumper Setting (page 22
for B78 motherboard, page 28 for B98
motherboard and page 34 for B68
motherboard)
Wall Mount Kit Assembly
4-2.
Fix the wall-mount bracket onto the
1.
wall.
Place the VESA bracket onto the
2.
VESA mounting holes on the system
and fasten the screws (x4).
Align the VESA bracket with the
3.
system into the wall-mount brakcet
and make sure they are well fixed.
Wall-mount bracket
VESA bracket