8
Power Adapter Replacement
3-3.
Disconnect the power cable from
1.
the I/O panel.
Route the power cable through the
2.
cable management hole on the
stand as the direction of the arrow
shows.
Disconnect the power cord from
3.
the power adapter which is fixed
in the power adapter bracket pre-
installed in the stand.
Loosen the screws (x2) to remove
4.
the power adapter bracket.
Gently pull the power adapter out
5.
of the cable management hole of
the stand.
Replace the power adapter by
6.
reversing the procedure of above
steps.
If your system is equipped with a stand, please replace the power adapter by
following the steps below.
