Chapter 7: Troubleshooting 21
Axon Body 2 Camera User Manual
indésirable.
Section 8.3 of RSS-GEN
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be chosen so that
the equivalent isotropically radiated power (e.i.r.p.) is not greater than necessary for successful
communication.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio ne peut
fonctionner qu’au moyen d’une antenne d’un seul type et d’un gain maximal (ou inférieur)
approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique pour les autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas celle requise pour établir
une communication satisfaisante.
THIS MODEL DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO
WAVES.
Section 6.8 of RSS-GEN
This radio transmitters IC: 8803A-S00947 has been approved by Innovation, Science and Economic
Development Canada to operate with the stamped metal dual band dipole antenna, with the
maximum permissible gain <2dBi at 2.4GHz, and <3.3dBi at 5.8GHz. The required impedance for
this antenna is 50 Ohm. Antenna type not included in this list that have a gain greater than the
maximum gain indicated is strictly prohibited for use with this device.
Declaration of Conformity
Axon Enterprise, Inc. declares that this Axon system is in compliance with the requirements and
other relevant provisions of the Radio Equipment Directive (RED) 2014/53/EU and the Directive
2014/30/ EU regarding electromagnetic compatibility. A copy of the original Declaration of
Conformity can be found at
.
Compliance Marks
MSIP (South Korea) Compliance Information
Applicant Name: Axon Enterprise, Inc.
Manufacturer / Manufacturer Country: Axon Enterprise, Inc. / USA
Name of equipment / model name: Axon Body 2 / AX1001
Certification Numbers: MSIP-CMM-CEW-S00947
Year of manufacture: separate marking
