Step 9 Fit Switch & Gage
9A)
Assemble the Magnetic Switch
Place the Magnetic Switch under the Main Housing as photo
and fix by 5/16” Flange Bolt.
9B)
Fit the Gage as photo shows, and tighten by 1/4”
Flange Bolt.
Then fixing the 1/2” clear tube to the
back of Round Collector as Photo
Step 10 Assemble the Canister
Filter(C1) with Main Housing (F)
Carefully turn dust
collector on its side to assist in the assembly of the main
filter to the housing Use 6 x Flange head 5/16” x 3/4”
long Whitworth bolts supplied.
Step 11 Turn unit upright onto its Legs now!
Note:
3 People will be needed to do this to avoid damage to Legs of machine.
Step 12 Assemble Canister Filter Spindle
.(L)
Place the connecting Spindle on the Canister
spindle as photo and tight by 2 pcsM6 Cap Screw
8
