6.
screw
7.
long bolt
8.
base
9.
big washer
10.
spring washer
11.
nut
Fitting and adjusting
In order to achieve better effect, we only
recommend the accessories of our machine.
when using bench grinder or
replacing parts, you should observe
the following instructions
Generally speaking:
Only use the parts or accessories in
proper size
Turn off the switch and cut off the
electric power before replace the
parts or begin other operation.
Fitting the bench grinder(picture E)
·
Put the bench grinder on the flat table.
·
Fix the bench grinder to the table or
proper table frame with bolts.
To achieve the requirements, you can
fix with 4 proper long bolts. When using
short bolts, you must take the rubber mat
away from the fitting hole.
Fitting parts( picture A,B,C,F)
Before using, you need to fix eye
shield brackets, fit and adjust the
adjustable tool rest, and fit the eye
shield bracket to keep the maximum
distance between parts.(
picture A,B,C
)
·
the distance between the bracket and
wheels is 2mm
·
the distance between the tool rest and
wheels is 2mm
If the bench grinder you bought has two
different adjustable tool rests, the
wider one should be fitted on the side of
the wider grinding wheel.
·
Adjust the eye shield brackets to ensure
they can supply the maximum protection.
·
The grinding wheels should be changed
if they are damaged 20% during polishing.
·
When using the bench grinder for the
first time, you should let it work 5
minutes under non-load condition.
Grinding wheel
When the distance between grinding
wheel and eye shield brackets reaches 5mm,
grinding wheel should be changed.
“sound test” should be taken when
using new grinding wheel. Knocking the
grinding wheel lightly can produce
ringing sound.
If you hear depressing sound,
the grinding wheels can’t be
used.
Replace the grinding wheel(
picture D
)
·
Take off the bolt(6) with turret spanner
and remove the outer guard(5).
·
Loosen nut (4) with 18mm spanner, and
remove outer flange(3)and grinding
wheel(2) in turn.
·
Make sure that inner flange(1) is on
the axes.
·
Take off the old grinding wheel, and fit
the new grinding wheel on the axes(make
sure that the new grinding wheel is
