05
Jaw Capacity Chart...
www.axminster.co.uk
Installing Jaws to Chuck...
Mounting the Adaptor...
Select the appropriate jaw for your project. Place the selected jaw on top of the carrier,
matching the number stamped on the main body to the number on each individual jaw. Using
the provided hex wrench, firmly tighten the jaw down onto the surface of the carrier with the
hex screws. Repeat this step for the remaining three jaws.
1. Wipe the inside of the threads and the outside of the adaptor to insure both surfaces are
clean.
2. Use the furnished 3/4" x l6tpi adaptor if necessary.
3. Hold the chuck in your hand, screw and tighten the adaptor into the bottom threaded
portion of the chuck.
Adaptor
Chuck
1 Set (4 pieces) gripper jaws
1 Set (4 piece) Internal &
external gripper jaws
1 Set (4 piece) step jaws
1 Set( 4 piece) extended pin
jaws
7/8" to 1-1/2"
1-3/8" to 2"
1/4" to 1"
7/8" to 1-5/8"
2-1/4" to 2-7/8"
2-5/8" to 3-1/4"
1/16" to 13/16"
Step 1: 5/8" to 1-5/16"
Step 2: 1-3/16" to 1-7/8"
B
E
F
G
Jaws Style
Gripping Dowel
Outside Diameter
Gripping in Hole
Inside Diameter
