MAIN ASSEMBLY
12
NOTE:
The fence (4) has two positions, vertical and
horizontal for cutting narrow pieces, see figs 42-43-44.
Fig 42-43-44
Mitre Fence Assembly
Locate the mitre fence (19) and slide the mitre fence into
the table (1) ‘T’ slot, see fig 45.
Fig 45
19
Step 7
Slide the fence assembly (5) until its up against
the blade and press down the locking lever (7), see fig 38.
Look at the magnifying glass to check it’s set to ‘0’ on the
scale, see fig 39. If it’s out of alignment, loosen the front
fence rail (2) and tap the side of the fence until the scale
reads ‘0’ then re secure the fence rail, see figs 40-41.
Fig 38
Fig 39
Fig 40-41
Magnifying scale
Magnifying scale set to ‘0’
