MAIN ASSEMBLY
11
Step 3
Fit the fence clamp assembly (5) over the front
fence rail (2) and lower the rear of the clamp assembly so
the adjustable guide rests on top of the rear guide rail (3),
see fig 28-29.
Fig 28-29
Step 4
Locate the M8 nut (14), and screw it onto the
thread of the M8 threaded lever (7) then screw the
threaded lever (7) into the threaded hole in the clamp
assembly (5) mechanism and tighten the nut with the
supplied spanner (22), see figs 30-31.
Fig 30-31
5
2
3
Adjustable guide rest
14
7
5
22
Step 5
Locate the fence (4), M8 lift and shift handle (6), M8
large washer (11) and threaded ‘T’ slot insert (8), see fig 32.
Place the large washer over the thread of the lift and shift
handle (6), see fig 33, introduce the handle through the
machined hole to the side of the cast iron fence (5) and
lightly screw on the threaded ‘T’ slot insert (8), see fig 34.
Fig 32
Fig 33-34
Step 6
Introduce the ‘T’ slot to the side of the fence (4)
over the threaded ‘T’ slot insert (8) and slide on the fence
until the fence (4) is flush with the end of the cast iron
fence (5). Tighten the lift and shift handle (6), see figs 35-
36-37.
Fig 35-36-37
4
11
11
6
8
8
5
6
4
8
‘T’ slot
Continues Over....
