AXMINSTER WORKSHOP 108512, Manual

Page: 7 / 28

ASSEMBLY
SET UP
7
Fig 12
2. Insert the hex key into the two holes in the guard
arm bracket and nip-up the screws to secure the
bridge guard arm in place, see fig 13.
Fig 13
Fig 14-15
3. Locate the spring metal plate (F), insert the
plate with the angled ends facing upward
into the cradles recess in the mounting plate
holder. Press the clips home see fig 14-15.
4. Slide the bridge guard (B) into place and
secure with the locking knob, see fig 16.
Fig 16
F
• Ensure that the machine has sufficient space
around it to fully function & is stable on the
floor & the wheel kit is locked off. Degrease tables &
cutter block - recommended is the Liberon wax &
polish remover, see fig 17-18.
Fig 17-18
Continues over...