AXMINSTER WORKSHOP 108512, Manual

Page: 16 / 28

MAINTENANCE / BLADE CHANGE
16
WARNING! BE VERY CAREFUL
WHEN TURNING THE CUTTERS AS
THE BLADES ARE EXTREMELY
SHARP. DO NOT OVERTIGHTEN TO
AVOID THE TORX HEAD SCREW
HEAD FROM GETTING DAMAGED!
Fig 53-54-55
Infeed table
Sharp edge
Rotation mark
Model: C2-260S
EXPLODED DIAGRAM / PARTS LIST
Part No. Description Size Qty
1 Base stand 1
2 Cover plate 2
3 Flat washer 5 4
4 Screw M5x8 4
5 Foot 4
6 Nut M10 8
7 Right inner plate 1
8 Countersunk head screw M5x6 5
9 Screw M5x50 1
10 Nut MS 1
11 Motor 1
12 Bolt M8x20 4
13 Nut M8 4
14 Spring washer 8 4
15 Washer 8 4
16 Driving pulley 1
17 Screw M6x8 1
18 V belt 1
19 Protective cover 1
20 Screw M5x25 6
21 Flat washer 5 6
22 Nut MS 6
27 Screw M10x35 3
28 Flat washer 10 2
40 Push block 1
54 Screw M4x16 3
55 Wire clip 3
56 Nut M4 3
57 Screw M4x12 1
58 Wire clip 1
59 Nut M4 1
103 Screw M8x30 4
104 Spring washer 8 4
105 Screw M6x35 1
106 Nut M6 1
107 Support plate 1
108 Lifting tube bracket 1
109 Locking plate 1
110 Guide 1
112 Screw M8x16 4
113 Hex socket screw M6x10 4
114 Seal ring 1
115 Screw M8x16 6
116 Lifting sleeve 1
117 Thicknesser table 1
118 Limiting plate 4
119 Countersunk head screw M4x6 12
120 pointer 1
121 Screw M4x6 2