AXMINSTER WORKSHOP 108512, Manual

Page: 6 / 28

ASSEMBLY
6
1. Line up the bracket mounting (C) with the
four holes on top of machine, see fig 05.
2. Use the four cap head bolts to secure,
see fig 06.
Fig 05-06
Fig 07
3. Tighten with a 6mm hex key, see fig 07.
Fitting the Fence Assembly
1. Attach the fence (D) to the fence support arm
and secure with the locking handle, see fig 08.
2. Slide the fence assembly into the fence
mounting bracket (C) Secure the fence
with the locking handle, see fig 09.
Bridge Guard Arm & Guard Cover Assembly
Fig 08-09
Fitting the bridge guard arm (A) and bridge guard
(B), level/parallel with the outfeed table, see fig 10-11
1. Line up the two pre-drilled holes in the bridge
guard arm mounting bracket (A) with the with the
two threaded holes to the side of the outfeed table,
see fig 12.
Fig 10-11
C
C
D
B
A
Fence
locking
handle
Fence
support
arm
Locking
handle