Axminster Trade AT305PS, Original Instructions Manual

Page: 4 / 142

Instruction manual for 12”panel saw
1
1. INFORMATION
1-1 General Information
OAV Equipment &Tools, Inc. is specialized to supply full range of panel saw from
1600, 2200, 2600, 3200 to 3800mm. The outlook design of this machine is unique
with complete cast iron bracket instead of sheet metal, enlarged outrigger and
carriage, direct dust collection outlet.
Besides of our Band Saw series, these Table Saw series are also innovative products.
Please enjoy your operation on this machine and if you have any comment to
improve them, please do not hesitate to contact us through your agent.
As woodworking machines with the quality design, our Panel Saw series are designed
to well rip solid wood, chipboard, fiberboard, plywood and similar materials. During
the usage, be careful of rigidity of working materials and don’t try forbidden
materials such as low flash point metals and high stiff stone, etc. HSS (High Speed
Steel) saw blade and milling tools should not be used.
The saw blade made in accordance with EN847-1: 1997 shall be used on the machine.
Generally speaking, this machine will be installed as the following conditions:
1) Supply voltage: 0.9 - 1.1 normal supply voltage
2) Source frequency: 0.99 - 1.01 normal frequency
3) Relative humidity: not exceed 50% at 40°C.
4) Atmosphere: Free from excessive dust, acid fume, corrosive gases and salt.
5) Avoid exposing to direct sunlight or heat rays which can change the
environmental temp.
6) Avoid exposing to abnormal vibration.
This machine was designed for certain applications only. We strongly recommend
that this machine NOT be modified and/or used for any application which for other
than its design.
If you have any question relative to its application, please NOT to use the machine
until you have detail instruction from your dealer.