Axley 761-033, Operating Instructions Manual, Page: 79 / 89

ENGLISH
79
Step 12
Insert the right burner valve (12) in the opening on the right burner panel, fit the holder for the control knob
(15) on the right shelf with 2 screws M4 x 10 (EE) and then fit the control knob (16) on the right burner valve
(12) shaft.
NOTE: Before fitting the right burner valve on the burner panel on the right shelf, bend the metal hose as
shown in the diagram.
NOTE: The regulator is about 160 mm over the floor after installation.
WARNING! Always test for leaks with a soap solution before using.
WARNING:
The metal hose must not be bent more than
10 times. Always test for leaks with a soap
solution according the instructions before using.
EE (2)