Section 4
Assembly
4-3
16. Wearing protective gloves, install the bearing
cone onto the ring gear carrier.
17. With a lifting strap, fit the hub assembly onto
the knuckle. Hold the spindle in position.
If the vehicle is equipped with central tire
inflation:
install the surface protector (part num-
ber 5239) onto the spindle.
WARNING
To avoid serious personal injury and
damage to components, take care when
using lifting devices during service and
maintenance procedures. Inspect a lifting
strap to ensure that it is not damaged. Do
not subject lifting straps to shocks or drop-
loading.
If the vehicle is equipped with central tire
inflation:
remove the surface protector.
WARNING
Gear teeth can be sharp. Wear protective
gloves to avoid serious personal injury.
18. Wearing protective gloves, install the ring
gear with its bearing onto the gear carrier.
Align the gear splines with the hub splines.
ISAS5 SEPTEMBER, 2017
