AXITEC AXIstorage Li SV1 Installation Instruction Download

Page: 35 / 36

Annex 1: Installation and System Turn ON Progress List

Tick after

completion

No.

Item

Remark

☐

The environment is meeting all technical requirements.
3.3.1

Cleaning

3.3.2

Temperature

3.3.3

Fire-extinguisher System

3.3.4

Grounding System

3.3.5 Clearance

Refer to chapter
3.3

☐

Selection of installation sites.

Refer to chapter
3.4.3.

☐

Battery base is installed following the technical
requirements.

Refer to chapter
3.4.4.

☐

Battery modules installation.

Refer to chapter
3.4.5.

☐

Battery system is fixed.

Refer to chapter
3.4.6.

☐

Control Module (BMS) and Battery Modules are installed
well.

Refer to chapter
3.4.7.

☐

Connect

D+ and D-

between BMS and inverter/PCS or

confluence cabinet.

Refer to chapter
3.5.2.

☐

Connect the grounding cable.

Refer to chapter
3.5.1.

☐

Double check if every

power cable

communication

cable, grounding cable

is installed well.

Refer to chapter
3.5.2 and 3.5.1.

☐

Switch the external power or inverter/PCS on, ensure
that all the power equipment can work normally.

Refer to chapter
3.6.4.

☐

The first installation should do full charging progress
automatically.
If the status LED of BMS turns to blue, it means this battery
string is operating.

Summary of Contents for AXIstorage Li SV1





































Search results

Summary of Contents for AXIstorage Li SV1

Reviews:

Related manuals for AXIstorage Li SV1

Brands by name

Popular brands

AXITEC AXIstorage Li SV1, Installation Instruction

Search results

Summary of Contents for AXIstorage Li SV1

Reviews:

Related manuals for AXIstorage Li SV1

Brands by name

Popular brands