Installationsanleitung AXIbox 11K
EN211103
8
6 Installation
Electrical device should be installed, operated, serviced, and maintained only by qualified personnel. No
responsibility is assumed by the manufacturer for any consequences arising out of the use of this device. A
qualified person is one who has skills and knowledge related to the construction, installation and operation
of electrical device and who has received safety training to recognize and avoid the hazards involved.
All applicable local, regional, and national regulations must be respected when installing, repairing, and
maintaining this device.
6.1 Wall mounting the housing
To mount the AXIbox on the wall, follow the steps below:
1.
Align the drilling template horizontally on the wall and mark the 3 drill holes on the wall.
2.
Drill the 3 holes for the wall mounting of the wallbox and, if necessary, also the 3 holes for the
cable holder. The top two screws can already be fastened in the wall with the expansion pipes so
that the AXIbox can be hung from them later.
3.
Open the two screws on the underside of the AXIbox to open the housing.
4.
Hang the back of the housing on the two screws on the wall and fix the AXIbox in the wall with the
third screw.
5.
Seal the hole for the screw with the seal included in the scope of delivery.
