Axis T8705, User Manual, Page: 7 / 22

AXIS T8705 Video Decoder
Configure your device
3. Under Video output , select a resolution and refresh rate that works with your display. See the documentation for your
display.
Advanced camera settings
After you’ve added a camera, you can access more camera settings from the Edit view.
1. Go to Video sources .
2. Select a video source.
3. Click and then click Edit video source .
Remove a camera
1. Go to Video sources .
2. Find the camera you want to remove.
3. Clck and then click Delete video source .
Upgrade your device to firmware version 6.0.x
To upgrade your device to V6.0.x you must first upgrade it to V5.1.8.5. You need the following files:
• Firmware T8705_V5.1.8.5.bin (bridge firmware)
• Firmware T8705_V6.0.x.bin
Go to Maintenance > Firmware upgrade and click Upgrade . Follow the instructions.
• Un upgrade from V5.1.8.2 or V5.1.8.4 to V5.1.8.5 takes approximately 10 minutes.
• Un upgrade from V5.1.8.5 to V6.0.x takes approximately 15 minutes.
If the firmware upgrade failed
1. Send a report to axis.com/support . Include information about the device’s MAC address in the report.
2. Unzip the included wic file (decoder-image-prod-6.0.x.wic.gz) and save it to an SD card.
3. Insert the SD card into an SD card reader. Open the file and follow the instructions to upgrade the firmware with
the wic file.
7