Axis T8705, User Manual, Page: 6 / 22

AXIS T8705 Video Decoder
Configure your device
Configure your device
Add multiple cameras
Note
The camera wizard only works with Axis cameras. You must add cameras from other brands one by one, see Add a camera
on page 6 .
1. Go to Video sources .
2. Click Add video sources and select the method Step-by-step .
3. Click Next .
The wizard searches the network for Axis cameras.
4. Click Add credentials and enter Name , Username and Password . Click Save .
The decoder needs usernames and passwords to the cameras to access the video streams. The decoder can have multiple
credentials saved. It will try to access all cameras using all of the stored credentials.
5. Click Next .
6. Select the cameras you want to add and click Save .
The decoder will try to access the camera with all saved credentials.
To access more settings for the cameras, see Advanced camera settings on page 7 .
Add a camera
1. Go to Video sources .
2. Click Add video sources and select the method Manual .
3. Click Next .
4. Select a video source type and click Next .
5. Enter the configuration details.
- For an Axis camera: Enter a name, IP address, username and password for the camera.
- For other brands: Enter a name, a URL that can be used to access the video stream, the camera’s username
and password, and the codec used for the stream.
6. Click Save .
To access more settings for the cameras, see Advanced camera settings on page 7 .
Configure a monitor
1. Go to Display .
2. Select one of these options under Multi mode :
- To show the video sources one at a time in sequence, select Sequencer , and set the interval that each source
is displayed.
- To show multiple video sources at the same time, select Multiview , and select a layout.
6