Axis Q6055-C, Manual

Page: 25 / 238

AXIS Q6055-C PTZ Dome Network Camera
This product supports SD/SDHC/SDXC cards (not included).
For SD card recommendations, see www.axis.com
Buttons
Control Button
For location of the control button, see Hardware overview on page 6 .
The control button is used for:
• Resetting the product to factory default settings. See page 20 .
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.
Power button
Press and hold the power button to temporarily power the product when the dome cover is
removed. The power button is also used with the control button to reset the camera to factory
default settings. See
page 20 .
Connectors
Multiconnector
Terminal connector for connecting the supplied media converter switch, which provides the
following signals:
• DC Power
• Network (Ethernet 10/100Base-T)
• Input/Output (I/O)
Multicable connectors
Note
The supplied multicable is required in order to maintain the camera’s NEMA/IP rating.
The multicable is connected to the camera’s multiconnector, see Hardware overview on page 6 .
The wires are connected to the supplied media converter switch, see AXIS T8607 Media Converter
Switch on page 8 .
The cable provides the following signals:
25