AXIS Q6045-E Mk II PTZ Dome Network Camera
Detectors
1. Choose
Area of interest
from the drop-down list. Set the virtual area to detect if an object has disappeared from this
area of interest.
Important
When configuring
Object size
the view shall be zoomed out to
Wide
position.
2. Choose
Object size
from the drop-down list. Set the size limits of the object that should be detected. The camera will
detect any object whose size falls in between the minimum (blue shape) and maximum (white shape) range.
3. Use the
Sensitivity
slidebar to define how sensitive the detection should be. The lower sensitivity selected on the
Sensitivity
bar, the greater difference in luminance is needed between the object and the background for the detector to be activated.
See the online help
for more information.
Enter/Exit Detector
Enter/Exit Detector
is used to trigger an alarm if an object within a pre-defined area of interest has entered or left the area.
Do the following to set the detector:
Note
Use the
Drawing Opacity
slidebar to define how transparent the area of interest or object size shape should be. Note
that this change will not be saved.
1. Choose
Area of interest
in the drop-down list. Set the virtual area to detect moving if any objects are entering or
exiting the area of interest.
Important
When configuring
Object size
the view shall be zoomed out to
Wide
position.
2. Choose
Object size
in the drop-down list. Set the size limits of the object that should be detected. The camera will detect
any object whose size falls in between the minimum (blue shape) and maximum (white shape) range.
34
